Home/Electrical-Engineering/Alternating Current and Voltage

Alternating Current and Voltage MCQs

45 questionsElectrical-EngineeringPage 2 of 5

Practice free Alternating Current and Voltage multiple-choice questions with instant answer feedback and step-by-step solutions. Click an option to check yourself, reveal the full explanation, and work through all 45 questions — no login required.

Question 10hard
A waveform has a baseline of 3 V, a duty cycle of 20%, and an amplitude of 8 V. The average voltage value is
Question 11hard
Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is
Question 12hard
A 1 kHz signal has a period of 1 ms.
Advertisement
Question 13hard
A sine wave with a period of 4 ms is changing at a faster rate than a sine wave with a period of
Question 14hard
The instantaneous value is the voltage or current value of a waveform at its peak.
Question 15hard
A signal with a 400 μs period has a frequency of
Advertisement
Question 16hard
A sinusoidal current has an rms value of 14 mA. The peak-to-peak value is
Question 17hard
If the peak of a sine wave is 13 V, the peak-to-peak value is
Question 18hard
The conductive loop on the rotor of a simple two-pole, single-phase generator rotates at a rate of 400 rps. The frequency of the induced output voltage is