Applied Mechanics and Graphic Statics MCQs
Practice free Applied Mechanics and Graphic Statics multiple-choice questions with instant answer feedback and step-by-step solutions. Click an option to check yourself, reveal the full explanation, and work through all 355 questions — no login required.
Question 217hard
If a particle is projected inside a horizontal tunnel which is 554 cm high with a velocity of 60 m per sec, the angle of projection for maximum range, is
Question 218medium
Kinetic friction may be defined as
Question 219easy
Energy may be defined as
Advertisement
Question 220hard
A projectile has maximum range of 40 m on a horizontal plane. If angle of projection is a and the time of flight is 1 second, then sin a must be about (Assume g = 10 m/sec2)
Question 221hard
A car goes round a curve of radius 100 m at 25 m/sec. The angle to the horizontal at which the road must be banked to prevent sideways friction on the car wheels is tan-1x, where x is (Assume g = 10 m/sec2)
Question 222hard
A stone was thrown vertically upwards from the ground with a velocity of 50 m/sec. After 5 seconds another stone was thrown vertically upwards from the same place. If both the stones strike the ground at the same time, then the velocity with which the second stone was thrown should be (Assume g = 10 m/sec2)
Advertisement
Question 223hard
A block in the shape of a parallelepiped of sides 1m × 2m × 3m lies on the surface. Which of the faces gives maximum stable block?
Question 224hard
‘u1’ and ‘u2’ are the velocities of approach of two moving bodies in the same direction and their corresponding velocities of separation are ‘v1’ and ‘v2’. As per Newton's law of collision of elastic bodies, the coefficient of restitution (e) is given by
Question 225medium
A retarding force on a body does not