Process Equipment and Plant Design MCQs
Practice free Process Equipment and Plant Design multiple-choice questions with instant answer feedback and step-by-step solutions. Click an option to check yourself, reveal the full explanation, and work through all 382 questions — no login required.
Question 208easy
The normal range of velocity of water in pipes is __________ m/sec.
Question 209easy
The ratio of the largest load in a test to the original cross-sectional area of the test specimen is called the __________ stress.
Question 210easy
Fouling factor must be included in the calculation of over all design heat transfer coefficient, when the liquid
Advertisement
Question 211easy
The ratio of tube length to shell diameter in case of liquid shell and tube heat exchanger ranges from
Question 212easy
The distance between the top of the slots and the liquid surface when the static liquid is just ready to flow over the overflow weir is called
Question 213easy
The longitudinal stress induced in a thin walled cylinderical vessel under internal pressure is
Advertisement
Question 214easy
Apex angle of conical heads used in the bottom heads of chemical process equipments is usually
Question 215easy
Width and depth of grooves in the tube sheet holes normally are __________ inch respectively.
Question 216easy
__________ tower is the most suitable gas-liquid contacting device involving highly corrosive fluids.